- 61 -
Spirit GE User Manual
Below is a chart for your convenience detailing the Set DPI (your input setting) vs. Actual DPI (your output
results).
Set
DPI
125
250
300
*
380
500
600
*
760
1000
Actual DPI
127 254 381 381 508 762 762 1016
NOTE
*
Outputting a full-table (34” x 18”) job using 300 or 600 DPI will result in a truncation
error; this is due to the large differences in set DPI vs. actual DPI output for those two
particular DPI settings. Therefore, when processing a 34” x 18” job using 300 DPI, we
recommend you move to the next higher DPI setting of 380. Similarly, for a 34” x 18” job
using 600 DPI, we recommend you use 760 DPI.
Mirror (Option Page)
[DEFAULT SETTING: Unselected]
Checking this box will automatically engrave your image with a mirrored effect. This setting will flip the
image along the Y-axis from left to right and vice-versa.
TIP
When engraving a stamp, via the stamp mode, the stamp image needs to be engraved
in reverse (mirrored) for the final stamp to be correctly laid out.
Invert (Option Page)
[DEFAULT SETTING: Unselected]
Checking this box automatically inverts / reverses the color of your image (the white areas become black
and vice versa). The Invert option is not available in disabled with Manual Color File mode selected.
TIP
Invert mode is useful when creating a stamp in Stamp Mode, as inverting your normal
image will set the negative space to be engraved out, with the remaining positive space
(your stamp design) protruding out.
Mirror Effect
Invert Effect
