- 63 -
Spirit GE User Manual
5.2.3.2 Spirit GE Print Driver >> Pen Page
The LaserPro Spirit GE incorporates the use of 16 different colors to represent 16 different laser power
and speed settings when cutting and engraving. These colors are referred to as “Pens”. Think of
each pen as a designated laser setting, rather than as a color. As an example, a black and white
image will use only one power and speed laser setting (Black). An image that is made up of black, red
and blue colors will be processed using the laser settings designated for each particular color. In order
to utilize up to 16 different pens (laser parameter settings), make sure your graphics software can
recognize and utilizes the 16 pen colors designated by the Spirit GE print driver.
If you would like to specify your own colors to designate to a particular laser setting, then all you have
to do is to double-click on that particular pen color from the pen menu and a color manager window
will open where you can select “define custom colors” to define your own color (shown in the picture
below). This is useful when your image is composed of colors that are not part of the pen menu’s
default color selection, and instead of modifying your image, you simply would like to assign the laser
settings based on the existing colors based on your current image.
