- 93 -
Spirit GE User Manual
7.7 Dual-Head Option
With the Dual-Head optional item, an additional carriage head is integrated onto the engraver,
allowing for two identical engraving or cutting jobs to be performed at the same time. The worktable is
automatically divided into two identical work areas with each of the two laser carriages working each
area. The dual-head is ideally suited for high volume production of identical items, not only saving you
time, but doubling your productivity.
The dual-head device of LaserPro Spirit GE consists of six components: dual head (the 2
nd
laser
carriage), connecting bar, air tube B, air tube C, air tube connector and thumb screws. The main
benefit of dual head device is to increase the working efficiency. With two laser carriages, two
identical jobs can be engraved or cut at the same time. This can not only save time but also provide
you the more flexible working productivity. Please follow up the steps below to install the dual head.
INSTALLATION:
1) With the machine off, slide the original laser carriage all the way to the right.
2) Use a screwdriver and loosen the two screws on the dual-head.
3) Mount / install the dual-head on the X-rail and to the left side of the original laser carriage.
4) Use a screwdriver and tighten the two screws on the dual head to secure it to the X-rail.
5) Attach the dual-head’s connecting bar (right side) to the original laser carriage (left side)
using the included thumbscrews.
6) Now with your dual-head firmly in place, unscrew and remove the top and right blue caps
from the air tube connector.
7) Remove (pull out) the air tube from the original laser carriage and connect this tube to the
top-side opening of the air tube connector (opened in step 6).
Thumb Screws
Air Tube
Connector
Air Tube C
Connecting
Bar
Air Tube B
Dual-Head
