SoundAdvisor Model 831C
831C Setup Manager Overview
6-1
Module
Creating a Measurement Setup
T
he 831C makes measurements based on values indicated in a setup
file (Setup). Setups are created, edited, and deleted on the Setup
Manager tab. This module describes using the Setup Manager on the
831C and in G4, and how to create a custom Setup.
To make a variety of measurements for your specific task, define the
properties of a Setup, including the following values:
In this module:
6.1 831C Setup Manager Overview ............................................................................................... 6–1
6.2 Creating a Custom Setup File ................................................................................................. 6–2
6.2.1 Creating a New Setup File ............................................................................... 2
6.2.2 Customizing Setup Values On the Setup Manager Tabs ............................... 3
6.2.3 Choosing a Run Mode ..................................................................................... 7
6.3 Troubleshooting a Measurement Setup File ....................................................................... 6–12
6.1 831C Setup Manager O er iew
FIGURE 6-1
Setup Manager Tab
L
eq
, L
max
, L
min
corresponding to user-selected
values of frequency weighting and detector
L
peak
and L
peak(max)
corresponding to a user-
selected value of frequency weighting
1/1 and/or 1/3 octave real-time spectra
Six values of Ln based on 6 user-selected values of
the percentage parameter n
Count of the number of times the levels (SPL and
Peak) exceed user-selected values
Sound exposure and sound exposure level data
The
Active
setup
determines what the next
measurement is based
on.
Highlight the Setup you
want to view or edit on
the Setup Manager tab,
then use the top-left and
top-right softkeys to
access other the settings
tabs. Navigate back to
the Setup Manager tab to
save your changes.
The
Default
setup, when
Set to Active
, restores all
active properties to factory
default values. The
Default
is a read-only file and can’t
be edited or deleted.
Shows the current
Setup.
