Appendix A: Command Reference
SLM User Guide
303
Authentication Commands
set auth
Syntax
set auth <one or more parameters>
Parameters
local <1-7>
nis <1-7>
ldap <1-7>
radius <1-7>
kerberos <1-7>
<1-7>
securid <1-7>
authusenextmethod <enable|disable>
limitsysadmin <enable|disable>
Description
Sets ordering of authentication methods and how authentication methods are used.
Authentication can occur using all methods, in the order of their precedence, until a successful
authentication is obtained, or using only the first authentication method that responds (in the event
that a server is down).
Note:
If SecurID is used, no other parameters can be used.
Any methods omitted from the
set auth
command will be disabled if at least one method is
selected
set ldap
Syntax
set ldap <one or more parameters>
Parameters
state <enable|disable>
server <IP Address or Name>
port <TCP Port>
base <LDAP Base>
bindname <Bind Name>
bindpassword <Bind Password>
adsupport <enable|disable>
encrypt <enable|disable>
Description
Configures the SLM to use LDAP to authenticate users who log in to the SLM via SSH, Telnet, the
web, or the console port.
set nis
Syntax
set nis <one or more parameters>
Содержание SLM
