Lantronix SLM Скачать руководство пользователя страница 252

Страница: 252 / 370

11: Operation and Maintenance

SLM User Guide

252

Table 11-45 Device Firmware Update - SLC/SLB Tab - FTP/SFTP Server

3. In the

SLC/SLB Devices to Update

area, select one or more of the SLC/SLBs managed by

the

SLM

. (Use Ctrl+click for multiple selections.)

4. To update the SLC/SLBs, click the

Update

button. When the update is complete, a

confirmation message displays.

Note:

To check the progress of the update, click the Progress

button above the

menu.

Key

If the user selects the firmware file from the SLC/SLB FW Upgrade Files directory,

no entry is required. Otherwise, enter a key for validating the firmware file.

Lantronix provides the key with the firmware file (32 hex characters).

Local File

From the drop-down list, select the firmware update (from the Files > SLC/SLB FW

Upgrade Files directory.)

Client File

Enter or browse to the file where the update is stored.

Setting

Description

FTP Server

The IP address or host name of the server used for obtaining updates. May have

up to 64 alphanumeric characters and may include hyphens and underscores.

Path

The default path on the server for obtaining firmware update files. May be blank.

Login

The user name for accessing the FTP server.

Password and
Confirm Password

The FTP user password.

Connect Timeout
(secs)

The number of seconds after which the connection attempt times out. Default is 60.

Download Timeout
(secs)

The number of seconds after which the download attempt times out. Default is 180.

Apply firmware
update to inactive
bank?

Newer SLCs and SLBs use two partitions (should one fail, the user can fall back to

the other). Check this option to apply the firmware update to the inactive partition.

Use current
configuration in new
bank?

If updating the inactive partition, this will take the configuration from the current

(active) bank and apply it to the updated partition.

Reboot device after
firmware update?

Use this option to force the SLC/SLB to reboot (and come up using the new

firmware version).

Setting

Description

Содержание SLM



















































































































































































































































































































































































Результаты поиска

Содержание SLM

Отзывы:

Бренды по названию

Популярные бренды

Lantronix SLM, Руководство пользователя

Результаты поиска

Содержание SLM

Отзывы:

Бренды по названию

Популярные бренды