Lantronix SLM Скачать руководство пользователя страница 59

Страница: 59 / 370

6: Configuration and Operation Overview

SLM User Guide

Auto-Save:

The administrator saves the configuration of one SLM on another SLM. If there is a

need, the second SLM can "become" the first SLM.

Configuration Save and Restore:

The administrator saves and restores system configurations,

providing rapid recovery of inadvertent configuration changes.

User Log (Audit Trail):

Every successful login, logout, and command on the command line

interface and web is logged into a database table. The administrator reads this information from

the CLI or web and creates an audit report for one or multiple users.

Events:

The administrator defines alarms and triggers that constitute an event. Events are sent to

specific users or recorded on the syslog or on another device through an SNMP trap.

Files:

The administrator manages (imports, exports, deletes, and renames) and views upgrade,

configuration, syslog, audit log, port log, sysconfig, device session, and trap files.

Содержание SLM



















































































































































































































































































































































































Результаты поиска

Содержание SLM

Отзывы:

Бренды по названию

Популярные бренды

Lantronix SLM, Руководство пользователя

Результаты поиска

Содержание SLM

Отзывы:

Бренды по названию

Популярные бренды