46
6.0
REBOOT
REBOOT
REBOOT
REBOOT
Command
(Used only when IP addresses are changed)
LCI800>REBOOT
Are you sure you want to reboot? yes
Please enter root password: ****
ConsoleServer800 Boot V1.20
Copyright 2000 by Lightwave Communications, Inc. All rights reserved.
Identify Flash
Flash ID OK
Verifying Flash Image
Starting systemÿ
Lightwave Communications, Inc. ConsoleServer800
Please wait...system initializing
Checking non-volatile memory...
2048
Start checking and reading stored data
Reading User Start up .........
LCI800>
The ConsoleServer 800 can be rebooted at any time using the command
REBOOT
. The system will reset, all users will be disconnected, and the power-on
self-test will run. Any user may issue the
REBOOT
command so long as they
have the administrator password.
At any ConsoleServer 800 prompt, enter the command
REBOOT
. The system will
prompt
Are you sure you want to reboot?
. Enter
YES
to proceed, or
enter
NO
or just hit
<ENTER>
to exit without rebooting. The system will then
prompt for the administrator password. The ConsoleServer will only echo stars
when the password is entered. If the password is correct, the system will reboot
and display its power-on self-test messages. Otherwise, it will return to the same
prompt present before the
REBOOT
command was entered.
Note that any active network sessions will disconnect while the system reboots,
and no network sessions can be established while the system reboots.