36
The first prompt the user should see after connecting to the ConsoleServer 800
is the
LCI800>
prompt (additional information may be on the screen as indicated
in the sections above). This indicates that the user is not currently logged in and
that no servers may be reached through the ConsoleServer 800. The prompt will
change to reflect the level in which the user is, and in monitor mode, will indicate
which server is selected.
The help screens also change according to the user's login level. There are
separate help screens for a logged out user, a logged in user, and a user in
monitor (a.k.a. device) mode. The user may see a complete list of available
commands at any prompt by typing
HELP
,
H
, or
?
and pressing
<ENTER>
, by
pressing
<F1>
, or by selecting
DISPLAY HELP SCREEN
from a pull-down
menu. To use the pull-down menu of commands available at each user level, the
user may press
<F2>
or
<CTRL>+D
. By using the up and down arrow keys, the
user may move the highlight bar to the desired command, and then press
<ENTER>
to select that command. The user may use the
<F1>
and
<F2>
keys
only if the terminal or terminal emulation supports VT100 function keys. If the
terminal or emulation program does not support VT100 function keys, then the
user may press the
<CTRL>
and
D
key simultaneously to use the pull-down
menu. To exit from a menu without selecting a command, press
<ESC><ESC>
or
<CTRL>+C
.
Pressing
<CTRL>+U
(the control and
U
key simultaneously) will erase all typed
commands on the current command line back to the system prompt. Pressing
<CTRL>+R
retypes the last command executed and waits for the user to hit
<ENTER>
to execute it.
LOGGED OUT HELP
F1 - Display Help Screen (VT100 mode)
F2 - Display Pull Down Menu (VT100 mode)
TTY COMMANDS:(LOGGED OUT MODE)
LOGIN - Login with ID and Password
INFO - Display System Info
REBOOT - Perform a warm boot, requires root password
LOGGED IN HELP
F1 - Display Help Screen (VT100 mode)
F2 - Display Pull Down Menu (VT100 mode)
TTY COMMANDS: (LOGGED IN MODE)
LOGOUT,LOGOFF - Logout
SELECT [SERVER NAME\#] - Select a server by name or number
DISELECT[SERVER NAME\#] - Select a server and enter direct mode
CHANGEPSWD or PASSWD - Change user password
CONNECTIONS - Display connections list
DEVLIST - Display installed devices list
EDITESC - Edit direct mode escape sequence
EDITBRK - Edit Break generation escape sequence
REBOOT - Perform a warm boot, requires root password