29
4.7.1
LINESPERPAGE
LINESPERPAGE
LINESPERPAGE
LINESPERPAGE
Command
sys admin>LINESPERPAGE
Lines per page set to 22
sys admin>LINESPERPAGE 10
Lines per page set to 10
sys admin>
The
LINESPERPAGE
command allows the administrator to change the number of
lines displayed per terminal page on the control card port before the
more
prompt is displayed. The number of lines to display per page is entered after the
command. Entering the command without a number following will display the
current amount of lines displayed per page. The default value is 22, which will
work properly with a 24-line display.
4.7.2
TIMEOUT
TIMEOUT
TIMEOUT
TIMEOUT
Command
sys admin>>TIMEOUT
Timeout set to 1 minutes
sys admin>>TIMEOUT 0
Timeout set to 0 minutes
0 disables the timeout from occurring
sys admin>>TIMEOUT 5
Timeout set to 5 minutes
sys admin>>
The
TIMEOUT
command allows the administrator to define a time limit on how
long an idle administration session may remain logged in. If there is no
interaction for the defined amount of time, the system will log out the
administrator. The time limit in minutes is entered as a command qualifier after
the command, and must be entered as a whole number. Defining the time limit
as 0 will disable this function. The default value is one minute.
4.8
Breaking User Connections
The administrator has four commands available to forcibly break user
connections to devices. The commands
BREAK
and
FORCELOGOUT
allow the
administrator to break any connection on demand, while
TELNETTIMEOUT
and
MODEMTIMEOUT
automatically break idle user sessions for the network or
modem card.