Lanier LD225, Руководство по эксплуатации функций

Страница: 47 / 138

Sending Scan Files by Scan to Folder
39
3
Note
❒
If you press [ NDS ] for "Con-
nection Type", enter the user
name, and then enter the
name of the context contain-
ing the user object. If the user
name is “user” and the name
of the Context is “context”,
the user name will be “us-
er.context”.
Reference
For details about the maxi-
mum number of characters
that can be entered, see p.123
“Scan to Folder”.
H
If a password is required for
logging on, enter it.
Press [ Manual Input ] to the right
of the password field.
The soft keyboard appears.
I
Press [ Connection Test ] .
A connection test checks the
specified shared folder exists.
Note
❒
You cannot connect to fold-
ers you are not allowed to
read.
❒
The connection test may take
time.
❒
You may not be able to press
[ Connection Test ] right after
pressing
[ Cancel ]
during a
connection test.
❒
Even if the connection test
was successful, the machine
may fail to transfer the file if
you do not have write privi-
leges for the file or there is
not enough free hard disk
space.
J
Check the connection test re-
sult, and then press
[ Exit ]
.
K
Press [ OK ] .
L
To enter more destinations, re-
peat steps
A
to
K
.
Note
❒
To deselect a destination, press
[
U
Prev. ]
or
[
T
Next ]
until the
destination appears in the
destination field, and then
press the
{
Clear/Stop
}
key.
❒
To change the path for an en-
tered folder, press
[ Change ]
on the left side of the destina-
tion field. Enter the correct
path for the folder, and then
press
[ OK ] .
❒
To check the selected desti-
naions, press the
{
Check-
Modes
}
key.
Select a folder on a network
computer
A
Press [ Enter Destination ] .
B
Press [ SMB ] .
Note
❒
If you try to switch to a pro-
tocol from one for which
[ Path ] , [ User Name ] or [ Pass-
word ] is specified, a message
asking you to confirm the
protocol change appears.
C
Press [ Browse Network ] on the
right side of the path field.
The list of client computers on
the same network appears.