Lanier LD225, Руководство по эксплуатации функций

Страница: 27 / 138

Sending Scan Files by E-mail
19
2
Using a registration number to
select a destination
A
Press [ Registration No. ] .
B
Enter the five digit registration
number that has been assigned
to a destination folder using
the number keys.
If the entered number is less
than five digits, press the
{
#
}
key after the last number.
Example: To enter 00003
Press the
{
3
}
key, and then
press the
{
#
}
key.
C
To select more destinations, re-
peat steps
A
to
B
.
Note
❒
To deselect a destination,
press
[
U
Prev. ] or [
T
Next ] to
display the destination in the
destination field, and then
press the
{
Clear/Stop
}
key.
Manual entry of an e-mail
address
A
Press [ Manual Input ] .
The soft keyboard appears.
Note
❒
Depending on the security
settings,
[ Manual Input ] may
not be displayed.
B
Enter the e-mail address.
Note
❒
For details about the maxi-
mum number of characters
that can be entered, see p.122
“E-mail”.
❒
It is possible to enter alpha-
numeric characters and peri-
ods. The symbols ( ) \ , ; : ”
and spaces cannot be en-
tered. For details, see p.122
“E-mail”.
C
Press [ OK ] .
Note
❒
If you press [ ProgDest ] , a screen
for registering and changing
address book entries ap-
pears. Using this screen, you
can register e-mail addresses
directly into the address
book.
❒
To change an e-mail address
entered, press
[ Change ] locat-
ed on the left side of the des-
t i n a t i o n f i e l d . T h e s o f t
keyboard appears. Make any
changes, and then press
[ OK ] .
❒
To check the selected desti-
nations, press the
{
Check
Modes
}
key.
❒
Depending on the security
settings,
[ ProgDest ] may not
be displayed.
D
To enter more destinations, re-
peat steps
A
to
C
.
Note
❒
To deselect a destination, press
[
U
Prev. ] or [
T
Next ] to display
the destination in the desti-
nation field, and then press
the
{
Clear/Stop
}
key.