Lanier LD225, Руководство по эксплуатации функций

Страница: 115 / 138

Settings
107
9
❒
When [ Off ] is selected and [ Auto
Detect ] is selected for scan size, if
originals of different sizes are
placed in the ADF, the maxi-
mum size will be detected as the
scan size.
❖
Original Orientation Priority
Select the default for original
placement orientation. When orig-
inals are always positioned the
same way, select that orientation
as the default to make operation
easier.
Reference
p.79 “Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides”
❖
Change Initial Mode
Select
[ Standard ]
to use the stand-
ard settings as the initial mode
which is the mode of the machine
immediately after the operation
switch is turned on or modes are
cleared or reset.
Select
[ Program No.10 ]
to use the set-
tings stored in Program No.10 as
the initial mode.
Scanning a custom-size
original
When scanning a custom-size origi-
nal, measure the
[
V
Original Size ] ,
[
V
Start Position ]
, and
[
V
Scan Area ]
val-
ues, and specify the settings as de-
scribed below. The procedure will be
explained using the following origi-
nal:
Procedure for Specifying a custom-size
original
A
Press [ Custom Size ] on the Scan
Size Setting screen.
Scanning an entire original
The following diagrams explain
the relationship between the
[
V
Original Size ] (X1 and Y1) and
[
V
Scan Area ]
(X3 and Y3) settings.
A
Specify [
V
Original Size ] (X1 and
Y1) using the number keys,
and then press the
{
#
}
key.
For example, set X1 to 17 inch
and Y1 to 8 inch.
AHY009S
AHU007S