Lanier LD225, Руководство по эксплуатации функций

Страница: 46 / 138

Sending Scan Files by Scan to Folder
38
3
M
Check the connection test re-
sult, and then press
[ Exit ] .
N
Press [ OK ] .
O
To enter more destinations, re-
peat steps
A
to
N
.
Note
❒
To deselect a destination, press
[
U
Prev. ] or [
T
Next ] to display
the destination in the desti-
nation field, and then press
the
{
Clear/Stop
}
key.
❒
To change the path for the
folder that has been entered,
press
[ Change ] on the left side
of the destination field. Enter
the correct path for the fold-
er, and then press
[ OK ]
.
❒
To check the selected desti-
nations, press the
{
Check
Modes
}
key.
Directly enter the path for the
folder in the NDS tree or on the
NetWare server
A
Press
[ Enter Destination ]
.
B
Press [ NCP ] .
Note
❒
If you try to switch to a pro-
tocol from one for which
[ Path ] , [ User Name ] or [ Pass-
word ] is specified, a message
asking you to confirm the
protocol change appears.
C
Select "Connection Type". To
specify the NDS tree name,
press
[ NDS ] . To specify the Net-
Ware server name, press [ Bind-
ery ] .
D
Press [ Manual Input ] on the right
side of the path field.
The soft keyboard appears.
E
Enter the path for the folder.
Note
❒
If you set "Connection Type"
to
[ NDS ] , the NDS tree name
is “tree”, the name of the con-
text including the volume is
“context”, the volume name
is “volume”, and the folder
name is “folder”, the path
will be “\\tree\volume.con-
text\folder”.
❒
If you set "Connection Type"
to
[ Bindery ]
, the NetWare
server name is “server”, the
volume name is “volume”,
and the folder name is “fold-
er”, the path will be “\\serv-
er\volume\folder”.
❒
For details about the maxi-
mum number of characters
that can be entered, see p.123
“Scan to Folder”.
F
Press [ OK ] .
G
Enter the user name for log-
ging on to the NDS tree or Net-
Ware server.
Press
[ Manual Input ]
to the right
of the user name field.
The soft keyboard appears.