Lanier LD225, Руководство по эксплуатации функций

Страница: 45 / 138

Sending Scan Files by Scan to Folder
37
3
Note
❒
If you try to switch to a pro-
tocol from one for which
[ Path ] , [ User Name ] or [ Pass-
word ]
is specified, a message
asking you to confirm the
protocol change appears.
C
Press [ Manual Input ] on the right
side of the server name field.
The soft keyboard appears.
D
Enter a server name.
Note
❒
For details about the maxi-
mum number of characters
that can be entered, see p.123
“Scan to Folder”.
❒
An IP address also can be en-
tered.
E
Press [ OK ] .
F
Press
[ Manual Input ]
on the right
side of the path field.
The soft keyboard appears.
G
Enter the path for the folder.
Note
❒
For details about the maxi-
mum number of characters
that can be entered, see p.123
“Scan to Folder”.
❒
The following is an example
of a path where the folder
name is “user” and the sub-
folder name is “lib”: user\lib
H
Press [ OK ] .
I
Enter the user name according
to the setting at the destina-
tion.
Press [ Manual Input ] to the right
of the user name field to display
the soft keyboard.
Reference
For details about the maxi-
mum number of characters
that can be entered, see p.123
“Scan to Folder”.
J
Enter the password according
to the setting at the destina-
tion.
Press
[ Manual Input ]
for
[ Pass-
word ] to display the soft key-
board.
K
To change the port number
which is set in
[ System Settings ]
,
press [ Change ] on the right side
of the port number field. Enter
a p o r t n u m b e r u s i n g t h e
number keys, and then press
the
{
#
}
key.
L
Press
[ Connection Test ]
.
A connection test is performed
to check whether the specified
shared folder exists.
Note
❒
The connection test may take
time.
❒
You may not be able to press
[ Connection Test ] right after
pressing [ Cancel ] during a
connection test.