Lanier AP4510, Руководство по установке

Страница: 154 / 424

Troubleshooting
80
5
Removing Misfed Paper
When a paper misfeed occurs, an error
message appears on the panel display.
The procedure you should follow to
remove the misfed paper depends on
the location of the misfeed, which is
indicated on the panel display.
R
CAUTION:
Important
❒
More than one misfed area might
be indicated. In this case, check
every applicable area. See the fol-
lowing charts shown in the illus-
tration.
❒
If paper continues to misfeed,
check the following points.
• Confirm that the setting of the
paper size dial matches the size
and feed direction of the paper
loaded in the paper tray.
• Confirm that the toner bottle is
set correctly.
❒
If paper misfeeds still occur, contact
your sales or service representative.
❒
Do not leave any torn paper scraps
within the printer.
When "Remove Misfeed
A,Y:Input Tray" Appears
AAAA
Open the Bypass Tray (
A
A A
A
), and
then open the Duplex Unit by
pushing the catch upwards (
B B B B
).
BBBB
Open the right cover by pushing
the catch upwards.
Note
❒
If the optional Large Capacity
Tray RT36 is equipped with your
printer, pull the lever (
A
) to ex-
tend the connecting unit (
B
).
• When removing misfed paper,
do not touch the fusing section
because it becomes very hot.
Y
D
C
Z
A
B
U
W R R
TAPH200E
1
2
TAPP700E