Lanier AP4510 Скачать руководство пользователя страница 138

Страница: 138 / 424

Troubleshooting

Remove Misfeed

Z:Duplex Unit

There is paper in the Duplex
Unit.

Remove the misfed paper.

See p.80 “Removing Misfed
Paper”.

Remove Paper
All Output Trays

All output trays are full, and
the print job is suspended.

Remove paper from the trays,
and the print job will be re-
sumed automatically.

Remove Paper

Duplex Unit

There is paper in the Duplex
Unit.

Remove paper from the Du-
plex Unit.

Remove Paper

Fin. Proof Tray

The Finisher proof tray is full,
and the print job is suspend-
ed.

Remove paper from the tray,
and the print job will be re-
sumed automatically.

Remove Paper

Fin. Shift Tray

The Finisher shift tray is full,
and the print job is suspend-
ed.

Remove paper from the tray,
and the print job will be re-
sumed automatically.

Remove Paper

Inside Finisher

There is paper in the Finisher. Remove paper from the Fin-

isher.

Remove Paper
Mailb.ProofTray

The Mailbox proof tray is full,
and the print job is suspend-
ed.

Remove paper from the tray,
and the print job will be re-
sumed automatically.

Remove Paper

Mailbox Tray #

The Mailbox is full, and the
print job is suspended.

#: tray number

Remove paper from the Mail-
box, and the print job will be
resumed automatically.

Remove Paper
Standard Tray

The standard tray is full, and
the print job is suspended.

Remove paper from the stand-
ard tray, and the print job will
be resumed automatically.

Replace

Maintenance Kit

It is time to replace parts in-
cluded in the Maintenance
Kit.

Replace parts.

Replace
Toner Bottle

The toner bottle is not set cor-
rectly or toner is almost run
out.

Set the toner bottle correctly.
See p.80 “Removing Misfed
Paper”.

Toner Dust is Full

The toner dust is full.

Call your salse or service
representative.

Replace

Transfer Unit

It is time to replace the trans-
fer unit.

Replace the transfer unit.

Reset Bypass

Correctly

The Bypass Tray is not set cor-
rectly or is not set.

Set the Bypass Tray correctly.

Reset Duplex

Unit Correctly

The Duplex Unit is not set cor-
rectly.

Set the Duplex Unit correctly.
If the message appears again,
call your sales or service rep-
resentative.

An error has occurred in the
Duplex Unit.

Reset Fusing

Unit Correctly

The fusing unit is not set cor-
rectly.

Set the fusing unit correctly,
or set the proper fusing unit.

Messages/Second messages

Description

Solution

Содержание AP4510





































































































































































































































































































































































































































Результаты поиска

Содержание AP4510

Отзывы:

Похожие инструкции для AP4510

Бренды по названию

Популярные бренды

Lanier AP4510, Руководство по установке

Результаты поиска

Содержание AP4510

Отзывы:

Похожие инструкции для AP4510

Бренды по названию

Популярные бренды