44
“BLANK SKIP” FUNCTION
The “Blank skip” function is used to
eliminate the blank spaces between a
track and the other. When playing a
tape with this function on, at the end
of a track the next one is played au-
tomatically.
To turn this function on, select and
confirm it wit the right knob
21
(
fig.
1
). When the function is on, symbol
“
3
” appears in the small square near
the wording.
“SETTINGS” FUNCTION
(audio parameters setting)
(fig. 25)
To set audio parameters, select and
confirm the “Settings” function with
the right knob
21
(
fig. 1
) to display
the relevant menu, then follow the in-
structions given in paragraph “Audio
settings”.
CHANGING THE TAPE
PLAYING SIDE
Insert the cassette in the slot
3
(
fig.
1
) with the tape facing rightwards,
the tape starts playing automatically.
To change side before the end of the
tape, press key
25
(
fig. 1
) or the mul-
tifunction key “Side A/B”. After play-
ing a tape, the cassette side is changed
automatically (“Autoreverse” func-
tion). The display shows the side of
the cassette that is being played (side
A or B).
If the cassette is already inserted, se-
lecting “CASSETTE” with the SRC
key
12
(
fig. 1
) or the multifunction
key will start playing from the last
side played.
fig. 25
L0A5095g
028-061 connect thesis GB 22-10-2007 10:41 Pagina 44
