33
“SDV” FUNCTION
(volume changing with speed)
(fig. 18)
The “SDV” function makes it possi-
ble to automatically adjust the radio
volume level to the speed of the car,
increasing it as the speed increases to
maintain the correct ratio with the
noise level in the passenger compart-
ment.
The adjustment levels available are:
– OFF (function off)
– 1 (very weak)
– 2 (weak)
– 3 (medium)
– 4 (strong)
– 5 (very strong).
To turn the function on/off or enter
the setting, proceed as follows:
– select and confirm the “SDV”
function turning and pressing the
right knob
21
(
fig. 1
);
– turn the knob right or left to select
a setting or turn the function off, then
press the knob to confirm.
Pressing “Cancel” resumes the set-
tings stored previously.
“START VOL.” FUNCTION
(volume level at power on)
(fig. 19)
The “Start vol.” function shall be
used to set the max. volume level at
CONNECT power on.
If when switching the system off, the
volume is higher that the set one, the
system will restore automatically the
set volume level.
Proceed as follows: select and con-
firm the “Start vol.” function with the
right knob
21
(
fig. 1
); turn the knob
right to increase the max. power on
volume or left to reduce it.
fig. 18
L0A5090g
fig. 19
L0A5091g
028-061 connect thesis GB 22-10-2007 10:41 Pagina 33
