154
“INFOMOBILITY” SERVICE
Selecting and confirming the “Info-
mobility” function with the right
knob
21
(
fig. 1
) displays a screen to
be used to request
Targasys
pay as-
sistance services.
The functions available with the
multifunction keys are the following:
– Connect
– Cancel.
Services are available only upon
subscription. If the user hasn’t sub-
scribed yet or if the
Targasys
sub-
scription expired, then the “Connect”
multifunction key is disabled and the
message “Subscribed services not en-
abled” will be displayed.
User can call the
Targasys
operator
to get information to (re)activate the
service.
If the
Targasys
subscription ex-
pired, it is always possible to consult
stored information.
Press “Cancel” to go back to the
previous screen without sending the
request for information.
“Connect” function
Selecting “Infomobility” and con-
firming the “Connect” function, sends
the request for information. A message
will confirm that the call has been re-
ceived and to wait for the
Targasys
operator call. Upon receiving the re-
quest,
Targasys
activates a telephone
connection. When the connection is ac-
tivated the user can ask an operator for
the information required.
If it is not possible to activate the
telematic connection, the display will
show the corresponding warning mes-
sage. Some information will be given
only vocally by the operator, while oth-
ers may also be sent with SMS mes-
sages, that will be received regardless of
the function active (MAIN, AUDIO,
etc.). The message will be shown di-
rectly on the screen active at that mo-
ment, in a window containing the
“Read” and “Store”.
Pressing the “Read” key will display
the text of the message: if the text is
too long, use keys “Pg.
” and “Pg.
” to scroll the message.
After reading the message the fol-
lowing options will be available:
– Store
– Delete
– Drive Me (if the message contains
geographical indications)
– Call (if a telephone number is pre-
sent).
Pressing the “Store” key will store
the message, while “Delete” will clear
it from the display and from memory.
Pressing the “Drive Me” key will set
the point indicated in the message as
destination of the navigation system.
In this case the message will be stored
automatically.
Choosing “Call” the telephone num-
ber contained in the message will be
dialled automatically and the message
will be stored.
Should a sequence of messages be
received, a specific window will be
opened for each of them and for each
of them it will be possible to perform
the above operations.
152-162 connect thesis GB 22-10-2007 10:46 Pagina 154