Laguna Tools SuperMax SuperBrush 24 x 2, Руководство пользователя, Страница: 5 / 48

LAGUNATOOLS.COM 5
SAFETY RULES
1. KEEP GUARDS IN PLACE and in working order.
2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are removed from tool before turning it
on.
3. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
4. DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power tools in
damp or wet locations, or expose them to rain. Keep work area well lighted.
5. KEEP CHILDREN AWAY. All visitors should be kept safe distance from
work area.
6. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by
removing starter keys.
7. DON'T FORCE TOOL. It will do the job better and safer at the rate for which
it was designed.
8. USE RIGHT TOOL. Don't force tool or attachment to do a job for which it
was not designed.
9. USE PROPER EXTENSION CORD. Make sure your extension cord is in
good condition. When using an extension cord, be sure to use one heavy
enough to carry the current your product will draw. An undersized cord will
cause a drop in line voltage resulting in loss of power and overheating.
Table A shows the correct size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier gage. The smaller the gage
number, the heavier the cord.
Table A
Ampere Rating Volts Total length of cord in feet
120 25 50 100 150
240 50 100 150 300
More Than Not More
Than
Minimum gauge for cord
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not
Recommended
NOTE* 50 Amp Service requires a 6 ga. (min) cord no longer than 25 ’ .