Lagler TRIO 900.65.00.100, Руководство по эксплуатации

Страница: 60 / 80

TRIO 01.04.2015
English / Englisch
9.5 THE MACHINE RUNS BUT CREATES A GREAT
DEAL OF DUST
• The filter cartridge in the dust separator must be cleaned.
Section 7.2, Cleaning the filter cartridge
• The cleaning slide of the dust separator must be pushed back
into the dust separator until the limit stop.
Section 7.2, Cleaning the filter cartridge
• The dust bag is full or damaged and must be replaced.
Section 5.5, Changing the dust bag
• The dust bag is not correctly attached.
Section 5.5, Changing the dust bag
• The Velcro sealing tape at the machine housing is not
mounted correctly or damaged and must be corrected or
replaced.
Section 4.1, Preparing the machine, point 11 .
• The filter cartridge in the dust separator is damaged and
must be replaced.
Section 7.3, Changing the filter cartridge
• The pressure control sensor fixed to the dust separator is
dirty or damaged and must be cleaned or replaced. Use a
soft brush for cleaning (never compressed air)!
• The dust separator leaks. The proper assembly must be
controlled and its components be checked for damage.
Damaged parts must be replaced.
Section 7.3, Changing the filter cartridge
• The sealing felt on cover of inner housing is damaged or
worn out and must be replaced.
Section 7.6, Changing the sealing felt on the cover of the
inner housing
• The suction hose between dust separator and machine
housing has not been fitted properly or is damaged. It has
to be fitted correctly or replaced.
• There are clogged materials and deposits in the machine
that must be removed.
• The V-belt is damaged or worn-out and must be replaced.
Section 7.5, Changing the V-belt
CAUSES OF FAULTS
9
60