Lagler TRIO 900.65.00.100, Руководство по эксплуатации

Страница: 35 / 80

TRIO 01.04.2015
English / Englisch
TRANSPORT AND STORAGE
Transport and storage
WARNING!
RISK OF INJURY and RISK OF PROPERTY DAMAGE:
When transported in a car or the like, the machines and all
parts must be secured against sliding!
RISK OF FIRE from formation of sparks while sanding:
Always transport and store the machine without dust bag!
RISK OF FIRE from spontaneous combustion:
Oil or wax can lead to spontaneous combustion! Therefore,
the machine must always be cleaned carefully before
transport or storage!
6.1 DISMANTLING THE MACHINE BEFORE
TRANSPORTATION
For transport purposes the machine can be dismantled into two
pieces: chassis (frame with wheels, guide tube and dust separator)
and sanding unit (machine housing with motor and sanding disc
gear).
The TRIO three disc sanding machine is dismantled as follows,
please stick precisely to the suggested sequence of steps:
1 Switch off the machine and pull the power plug out of the
socket!
2 Loosen the cable plug of the sensor on the on/off switch by
turning the ring nut counterclockwise (fig. 51, 1) and pull the
cable plug off (fig. 51, 2).
3 Remove the on/off switch from the chassis (fig. 52, 1) and hook
it into the transport holder on motor switch box (fig. 52, 2).
6
Fig. 52 Hook the on/off switch into the transport holder
on motor switch box.
Fig. 51 Loosen the ring nut (1) and remove the cable plug
from the switch (2).
35