Lagler TRIO 900.65.00.100, Руководство по эксплуатации

Страница: 34 / 80

TRIO 01.04.2015
English / Englisch
Fig. 47 Pull the cover foil from the adhesive strip (1)
and seal the dust bag (2).
The dust bag must
be deposited in a closed and non-combustible
container!
Fig. 48 Make sure the dust bag is in the correct position:
- print towards you ( A) ,
- adhesive strip towards the rear ( B )!
5 Pull the cover foil from the adhesive strip on flap near the
opening of the dust bag (fig. 47, 1).
6 Fold the flap over the opening of the dust bag and seal the
bag (fig. 47, 2).
ATTENTION!
Dust-free sealing of the dust bag is only possible when the
dust bag has been mounted without any wrinkly on the neck
of the dust separator!
7 In order to preclude any damages by fire or explosion,
throw the sealed dust bag in a non-combustible container
(fig. 44, 1)! Cover this container with a non-combustible
cover (fig. 44, 2)!
8 Slip the opening of new dust bag and the MultiClip over the
neck of the dust separator. The side of the dust bag with the
print on it must be facing you (fig. 48).
9 Fasten the MultiClip by turning the nuts (fig. 49).
10 Close the dust bag box (fig. 50, 1) and lock it by turning the
two fasteners back to their downward position (fig. 50, 2).
11 Clean the filter cartridge of the dust separator as described
in Section 7.2, Cleaning the filter cartridge .
Fig. 49 Fasten the MultiClip by turning the nuts.
Fig. 50 Close the dust bag box (1) and lock it by turning the
two fasteners back to their downward position (2).
WORKING WITH THE TRIO
5
34