Lagler TRIO 900.65.00.100, Руководство по эксплуатации

Страница: 22 / 80

TRIO 01.04.2015
English / Englisch
4.2 CONNECTING THE POWER CABLE
WARNING!
RISK OF DEATH from electrical shock:
• Never connect the machine to hazardous electrical power
sources! Only use safety sockets!
• To protect yourself and the machine against faults in the
mains supply use a safety switch PRCD (for German mains
supply part number in
Section 11, Spare parts TRIO )!
• Observe the applicable regulations and legal requirements
for your country!
RISK OF FIRE from the overheating of the cables:
• The maximum cable length in order to connect the
machine to the mains supply must not exceed 20 m (790”)!
• Only the following motor cables and power cables may
be used:
- Machines with motor for mains voltage 220 V or 230 V:
Cables with three wires and wire cross-sections of at
least 2.5 mm² (0.0039 sq.in.)!
- Machines with motor for mains voltage 400 V:
Cables with five wires and wire cross-sections of at
least 1.5 mm² (0.0023 sq.in.)!
1 Insert the plug of the motor cable in the coupler of the
extension cable (fig. 13, 1).
2 Fasten the strain relief ring on the extension cable (fig. 13, 2).
3 Mount the strain relief ring on the handle (fig. 14).
4 Plug in the extension cable to a adequately fused mains
socket with PE contacts.
Fig. 13 Insert the plug of the motor cable in the coupler
of the extension cable (1). Fasten the strain relief
ring on the extension cable (2).
Fig. 14 Mount the strain relief ring on the handle.
COMMISSIONING
4
22