Lagler TRIO 900.65.00.100 Скачать руководство пользователя

Страница: 12 / 80

TRIO 01.04.2015

English / Englisch

HAZARD WARNINGS AND SAFETY INSTRUCTIONS

RISK OF INJURY and RISK OF PROPERTY DAMAGE from rotating

tools and parts of the machine:

•

For all operating conditions of the machine only one operator

is required. As a consequence, for safety reasons only

one

person

must be in the working area while operating the

machine!

•

Before switching on the machine, make sure that

- all wrenches and adjustment tools have been removed from

the machine,

- the sanding plates or milling discs are in place correctly!

•

The machine must not be switched on in a tilted position!

•

Never

leave the operational machine unattended!

•

Do not reach into rotating tools or parts of the machine!

•

Do not let children or other persons touch the machine or

cables and keep them out of the work area!

•

Do not wear any long articles of clothing or jewellery! These

could be caught by moving parts!

RISK OF INJURY and RISK OF PROPERTY DAMAGE from uninten-

tional starting of the machine:

•

The power plug

must always

be removed from the socket

when the machine is switched off!

•

Make sure that on/off switch is not set to ON when connecting

the machine to the mains supply!

RISK OF INJURY and RISK OF PROPERTY DAMAGE from the rolling

away, tipping or falling of the machine:

•

The machine must be secured against rolling away, tipping

or falling when not in use!

•

Always

ensure that the machine is standing securely!

RISK OF INJURY and RISK OF PROPERTY DAMAGE from unsuit-

able parts:

•

Only use tools, accessories and spare parts from LÄGLER

for the TRIO (part numbers in

Section 11, Spare parts TRIO

Warranty claims for foreign parts or damage caused thereby
cannot be accepted!

CAUTION!

Содержание TRIO 900.65.00.100

















































































Результаты поиска

Содержание TRIO 900.65.00.100

Отзывы:

Похожие инструкции для TRIO 900.65.00.100

Бренды по названию

Популярные бренды

Lagler TRIO 900.65.00.100, Руководство по эксплуатации

Результаты поиска

Содержание TRIO 900.65.00.100

Отзывы:

Похожие инструкции для TRIO 900.65.00.100

Бренды по названию

Популярные бренды