LaCie 131018 - StorView Snapshot - Mac, Руководство пользователя

Страница: 166 / 214

StorView RAID Module
158
14.6.3 Alarm Events
These events are related to the audible alarm reported by the SES processor. The ID is given in the
format of its hexadecimal value which is seen in Unix operating systems and its equivalent decimal value
in parenthesis which is seen in the Microsoft Windows operating system.
Alarm Event Messages Type [ID] Cause Action
Alarm Mute. Information
[0xB8D (2957)] The user muted the alarm.
The audible alarm is
temporarily muted.
No action necessary.
Alarm Disable. Information
[0xB8E (2958)] The user disabled the alarm.
The audible alarm has been
disabled and will silence all
alarm events. The disabled
alarm will be cleared when
the Alarm is enabled or the
controller is reset.
No action necessary.
Alarm Enable. Information
[0xB8F (2959)] The user disabled the alarm.
The audible alarm has been
enabled and will allow all
alarms to be heard.
No action necessary.
Alarm <x> is Off (Muted).
Where <x> is the alarm
number. Currently there is only
one alarm in the enclosure
system, however this is a
provision for future expansion.
Information
[0xC6E (3182)] No status condition being
reported.
Alarm silenced.
No action necessary.
User pressed the
Alarm Mute button on
the front panel.
Alarm <x> is Intermittent. Warning
[0xC6E (3182)] A status condition caused the
alarm to sound every two
minutes until muted. Press the Alarm Mute
button on the front
panel and isolate the
cause of the alarm.
Alarm <x> is Remind. Warning
[0xC6E (3182)] A status condition that
caused the alarm to sound is
continuing to remind the user. Press the Alarm Mute
button on the front
panel and isolate the
cause of the alarm.
Alarm <x> is On Continuous. Error
[0xC6E (3182)] A status condition caused the
alarm to sound. Press the Alarm Mute
button on the front
panel and isolate the
cause of the alarm.