LaCie 131018 - StorView Snapshot - Mac, Руководство пользователя

Страница: 42 / 214

StorView RAID Module
34
• Originating Device - specifies which device originated the event message.
• Message Content - provides a plain language content of the event message.
SYSLOG daemon supports both Linux and Windows platforms.
4.5.3 Operational View
Whenever a new RAID storage system event is logged, based on the type of event, StorView SYSLOG
will sent the message out to all its subscribers that match the type of event involved. If the event was an
Error message type, and all daemons are configured to receive those type of event messages, then they
all will receive the event log. If the event was an Information message type, then only those daemons
configured to subscribe to Information priority message will receive the event log.
Event logs are sent in standard text format and have no encryption, in such security can be a concern.
Additionally UDP packets are involved so there is no assurance that the event log arrived at the
subscriber (SYSLOG server).
4.5.4 Configuring SYSLOG
1 If you have not yet enabled the Global Access license please do so at this time, see 4.2 ”Upgrading the
Access License” beginning on page 27.
After activating the Access license, you will see the following screen when the SYSLOG tab is selected.
The following fields are described:
2 Enter the IP addresses of the host servers designated to be SYSLOG servers.
3 Enter the port ID of the recipient SYSLOG server. You must enter a correct value otherwise you will
receive an error message.
Field Description
SYSLOG Server Allows the user to enter the IP address of the SYSLOG servers. An
error message is displayed if an invalid server name is entered.
SYSLOGD Port Allows the user to enter a specified SYSLOG port. The default port
is 514. An error message will appear if the enter is invalid or left
blank. The range of port IDs are: 1 - 65535.
Information (I) If checked the recipient would receive Informational type of event
logs.
Warning (W) If checked the recipient would receive Warning type of event logs.
Error (E) If checked the recipient would receive Error type of event logs.
Delete Button Clicking this button clears the previously entered IP address for the
selected line and resets the check boxes to their default state.
Test Button Send out a dummy test message to the specified recipient servers.