manualshive.com logo in svg

LaCie 131018 - StorView Snapshot - Mac, Руководство пользователя

Поделиться
Скачать
LaCie 131018 - StorView Snapshot - Mac Скачать руководство пользователя страница 198

StorView RAID Module

190

Lost communication 
with the RAID 
Controllers.(continued)

Service is hung.

On Linux system access the process 
viewer and stop the StorView 
Process. Restart the process and click 
the Rescan button on the StorView 
Main screen.

Hot spare not 
automatically starting 
when drive failure 
occurs in a redundant 
array in which a global 
or dedicated hot spare 
is defined.

The Auto Rebuild option is not 
enabled in the Controller Parameters.
Hot spare disk drive is too small to be 
used for the drive replacement.
Waiting for a valid replacement drive 
to be inserted.

Open the Controller Information 
window (click the Controller icon), 
place a check mark in the box by 
clicking the check box on the Auto 
Rebuild parameter.

Ensure that the disk drive defined as a 
hot spare is equal to or greater than 
the size of the drive members of the 
arrays.

Auto Rebuild is not selected and no 
hot spare drive is assigned, but Auto 
Hot Spare is enabled. The array will 
begin rebuilding once a valid 
replacement drive is inserted in the 
drive slot of the failed drive.

Consistently occurring 
time out errors when 
the browser window is 
open.

Host HBA parameter settings are not 
configured for best performance 
optimization.

Access your Host HBA settings and 
make the following changes:

Execution Throttle

Improve general I/O performance by 
allowing more commands on the fibre 
bus. Do this by changing your host 
bus adapter’s execution throttle 
parameter to 256.

Scatter/Gather

 (Microsoft Windows) Increase the 
general I/O performance by allowing 
larger data transfers. Do this by 
editing the “MaximumSGList” 
parameter in the register. The 
recommended hexadecimal value is 
“ff.” The path is: 
HKEY_LOCAL_MACHINE/System/
CurrentControlSet/Services/<name of 
HBA driver>/Parameters/Device/.

Shared Memory Error 
is displayed.

The CGI script manager may have not 
released a segment of shared 
memory.

This may occur when heavy I/O is 
happening at the same time you are 
accessing StorView. If this occurs you 
will need to stop and then restart the 
StorView Server service.

Symptom

Reason

Solution

Содержание 131018 - StorView Snapshot - Mac























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды