LaCie 300 Series LCD Monitor
User Manual
page
OSD Control Button Functions
Symbol
Menu title
Explanation
VIDEO DETECT
Selects the method of video detection when more than one computer is con-
nected.
FIRST
The video input has to be switched to FIRST mode. When current video input
signal is not present, then the monitor searches for a video signal from the
other video input port. If the video signal is present in the other port,
then the monitor switches the video source input port to the new found video
source automatically. The monitor will not look for other video signals while the
current video source is present.
LAST
The video input has to be switched to the LAST mode. When the monitor is
displaying a signal from the current source and a new secondary source is sup-
plied to the monitor, then the monitor will automatically switch to
the new video source. When current video input signal is not present, then the
monitor searches for a video signal from the other video input port. If the video
signal is present in the other port, then the monitor switches the video source
input port to the new found video source automatically.
NONE
The Monitor will not search the other video input port unless the monitor is
turned on.
OFF TIMER
Monitor will automatically power down when the user has selected a prede-
termined amount of time. Before powering off, a message will appear on the
screen asking if the user wants to delay the turnoff time by 60 minutes. Press
any OSD button to delay the turnoff time.
TeChNICAl NOTe:
For the MAC with digital
output: Before turning on the MAC, the DVI Input
mode must be set to DIGITAL in “DVI SELEC-
TION” of OSD by pressing SELECT button then
“CONTROL” button when the DVI signal cable is
connected to the DVI-I connector (DVI-I) of the
monitor. Otherwise the MAC may not turn on.
TeChNICAl NOTe:
Depending on the PC
and Video card used, or when another Video signal
cable is attached, this function may not operate.
(Continued from previous page)
(Continued on next page)
