LaCie 300 Series LCD Monitor
User Manual
page
Installing Your LaCie Monitor
TeChNICAl NOTe:
Please refer to Caution
section of this manual for proper selection of AC
power cord.
7. Hold all cables firmly and place the cable cover onto
the stand (Figure H). To remove the cable cover, lift
the cover off as shown in Figure H.
8. Connect one end of the power cord to the AC inlet
on the back of the monitor and the other end to the
power outlet.
9. The Vacation Switch on the left side of the moni-
tor must be turned on. Turn on the monitor with the
front power button (Figure J) and the computer.
TeChNICAl NOTe:
The Vacation Switch is a
true on/off switch. If this switch is on the OFF po-
sition, the monitor cannot be turned on using the
front button. DO NOT switch on/off repeatedly.
10. No-touch auto adjust automatically adjusts the
monitor to optimal settings upon initial setup for
most timings. For further adjustments, use the fol-
lowing OSD (on-screen display) controls:
Auto Contrast (Analog input only)
Auto Adjust (Analog input only)
Refer to the page 17,
OSD Control Button Functions
,
for a full description of these OSD controls.
•
•
Figure H
Figure I
Figure J
Vacation
Switch
Power
Button
