LaCie 300 Series LCD Monitor
User Manual
page
OSD Control Button Functions
Tag
Menu title
Explanation
Tag7
Uniformity
This function electronically compensates for the slight variations in the white
uniformity level as well as for deviations in color that may occur throughout the
display area of the screen. These variations are characteristic of LCD panel tech-
nology. This function improves the color and evens out the luminance uniformity
of the display.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
display. If greater luminance is desired over the uniform performance of the display, then
UNIFORMITY should be turned off.
Uniformity Level
Select the level for UNIFORMITY adjustments.
Tag8
Language
OSD control menus are available in eight languages. Press LEFT or RIGHT to
select.
OSD H. Position
You can choose where you would like the OSD control image to appear on your
screen. Selecting OSD Location allows you to manually adjust the position of the
OSD control menu left or right.
OSD V. Position
You can choose where you would like the OSD control image to appear on your
screen. Selecting OSD Location allows you to manually adjust the position of the
OSD control menu up or down.
OSD Turn off
The OSD control menu will stay on as long as it is use. In the OSD Turn Off submenu,
you can select how long the monitor waits after the last touch of a button to shut off the
OSD control menu. The preset choices are 10-120 seconds by 5 seconds step.
Signal Information
Signal information can be displayed in the corner of the screen. Signal information is
either ON or OFF”.
Resolution Notifier
The optimal resolution is 1280 x 1024 for the LaCie 319 and 1600 x 1200 for the LaCie
320 and 321. If ON is selected, a message will appear on the screen after 30 seconds,
notifying you that the resolution is not set to 1280 x 1024 for the LaCie 319 or 1600 x
1200 for the LaCie 320 and 321. Press LEFT or RIGHT to select.
Hot Key
When this function is activated; the brightness and contrast of the monitor can be
adjusted without entering the OSD menu by using the front buttons. The LEFT or
RIGHT buttons adjust the brightness level. The DOWN or UP buttons adjust the
contrast level.
Factory Preset
Selecting Factory Preset allows you to reset all OSD control settings back to the factory
settings. Highlighting the control to be reset and pressing the RESET button can reset
individual settings.
