LaCie 300 Series LCD Monitor
User Manual
page
Installing Your LaCie Monitor
3. Place hands on each side of the monitor to tilt the
LCD panel to a 30-degree angle and lift up to the
highest position (Figure D).
4. Connect all cables to the appropriate connectors (Fig-
ure D).
5. To keep the cables neatly organized, place them into
the cable management system that is built into the
stand.
Place the D-Sub cable (not included) and the
power cable into the specific hooks as indicated
(Figure E).
Place the DVI cable and the 15-pin mini D-Sub
to DVI-A cable into the hooks as indicated (Fig-
ure F).
When using the monitor in Portrait mode, place
the DVI cable and the 15-pin mini D-Sub to
DVI-A cable into the hooks as indicated (Figure
G).
6. Make sure all cables are resting flat against the stand
(Figure F). Please check Tilt, Rise and Lower moni-
tor screen and screen rotation when you manage
cables.
•
•
•
Figure D
CAUTION:
Incorrect cable connections may
result in irregular operation, damage display qual-
ity/components of LCD module and/or shorten
the module’s life.
Figure E
Figure F
Highest
Stand
Position
30° Tilt
DVI-I
DVI-D
D-SUB
Figure G
