LaCie 300 Series LCD Monitor
User Manual
page
OSD Control Button Functions
Tag
Menu title
Explanation
Tag2
DVI Long Cable
(Digital input only)
Compensates for image degradation caused by using a long DVI cable. There are
4 possible settings, with “0” being the lowest level of compensation and “3” being
the highest level. The default setting is “1”.
Tag3
Auto Adjust
(Analog input only)
Automatically adjusts the Image Position and H.Size settings and Fine settings.
Press SELECT to activate Auto Adjustment.
Signal Adjust
(Analog input only)
Determines when the auto adjustment is activated automatically. The choices are
SIMPLE and FULL. Press LEFT or RIGHT to select.
H-size, Fine, H/V Position
Contrast
SIMPLE
O
X
FULL
O
O
O = Automatic adjustment
X = No automatic adjustment
NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.
Auto Adjust Level
(Analog input only)
Determines the automatic adjustment level for Auto Adjust. The choices are
SIMPLE, FULL and DETAIL. Press LEFT or RIGHT to select. Refer to the
below table.
Size, Fine,
Position
Contrast
Black level
Time
SIMPLE
O
X
X
1 second
FULL
O
O
X
1.5 seconds
DETAIL
O
O
O
5 seconds
O = Automatic adjustment
X = No automatic adjustment
A-NTAA SW
(analog only)
Sets up the Advanced No Touch Auto Adjust function. There are three kinds of
settings: 1) OFF; 2) ON: Advanced No Touch Auto Adjust occurs during power
on or when a change in the input signal is detected; 3) OPTION (not available)
Tag4
H. Position
Controls Horizontal Image Position within the display area of the LCD. Press
LEFT or RIGHT to adjust.
V. Position
Controls Vertical Image Position within the display area of the LCD. Press
LEFT or RIGHT to adjust.
