LaCie 300 Series LCD Monitor
User Manual
page
OSD Control Button Functions
Tag
Menu title
Explanation
Tag9
Screen Saver
User the Screen Saver to reduce the risk of image persistance.
MOTION (default: OFF): Screen image is reduced to 95% size and moves peri-
odically in four directions to reduce the risk of image retention. Screen image can
be set to move periodically in intervals from 10 to 900 seconds in 10 increments.
GAMMA (default: OFF): When OFF, the GAMMA selection that is used by the
display is the same as what is selected in Tag5 (page 29). When ON, is selected,
the GAMMA curve (except PROGRAMMABLE) is narrow, reducing the con-
trast and cutting down the risk of image retention.
NOTE: SCREEN SAVER function does not work when the TILING function is enabled.
When the SCREN SAVER function is enabled and the monitor is set to the recommended
resolution, the screen image will be reduced to 95% and will appear slightly less sharp than
normal.
Input Setting
Video Band Width (Analog input only): It is used when the unnecessary noise
from computer appears on a screen. It is strong ineffective, so that a number
becomes small. Press LEFT or RIGHT to select. Sync Threshold (Analog input
only): Adjusts the slice level of a synchronization signal. Press SELECT to move
the adjustment menu. Adjusts the sensitivity of the separate or composite input
signals. Try this option if the FINE adjustment does not successfully eliminate
the noise.
SOG Threshold (Analog input only): Adjusts the sensitivity of the Sync On Green
input signals. Adjusts the slice level when separating synchronization from sync
On Green signal input. Press LEFT or RIGHT to select.
CLAMP POSITION: Operating your monitor at a non-standard timing may
cause images to appear darker than normal or have color distortion. Use of the
CLAMP POSITION control will adjust images to their normal state.
