45
After the Fume stage is complete, the program will move to the Purge stage. The
screen will display the following information (see Fig. 6-17) during this stage:
The Purge stage is the final stage in a Fuming Cycle. During this stage, you will hear
the exhaust blower turn on to pull the fumes inside the chamber through the Main
Carbon Filter. This stage has a minimum time of 4:00 to ensure all CA vapors are
removed. Until this stage is complete, the doors will remain locked.
After the Purge stage is complete, the Fuming Cycle has finished. The screen will
display the following information (see Fig. 6-18) after this stage:
After the Fuming Cycle is complete, this screen will be displayed, along with an audible
beep and flashing chamber light, for 30 minutes or until the Main Door is opened. Upon
completion of the Fuming Cycle the doors will unlock automatically, so that evidence
and the used CA tin can be removed.
Figure 6-17
TIME SINCE
PURGE STAGE
BEGAN
PURGE STAGE TIME
TIME SINCE
PURGE STAGE
BEGAN
TOTAL TIME
SINCE PROGRAM
BEGAN
Figure 6-18
TOTAL PROGRAM
TIME DISPLAYED
Содержание Capture BT 31700-00
