36
CA Fuming
– Program Set-up
If fuming evidence with Cyanoacrylate, you are ready to select the Program, and adjust
the program parameters as desired. The CApture BT Fuming Chamber can also
Humidify older evidence to rehydrate prints without running the fuming cycle. See
Humidify
– Program Set-up
later in this section.
Keypad button presses are shown as
[BLUE WITH BRACKETS]
. Menu screen
selections are shown as
green italics
.
On the Main Menu screen, Select
RUN
by moving the red arrow to Run menu option,
and press
[OK]
. The Run Menu (see Fig. 6-7) displays three sub-menus, which offer
three types of cycles. The Humidify and Cleaning cycles are described in other
sections.
On the Run Menu screen (above), Select
CA FUME
by moving the red arrow to CA
Fume menu option, and press
[OK]
. The Run > CA Fume Menu (see Fig. 6-8) displays
all Program Parameters.
Figure 6-7
Figure 6-8
Содержание Capture BT 31700-00
