Kyocera TASKalfa 306ci, Руководство по обслуживанию

Страница: 155 / 430

2R4/2R5/2R6
6-154
Contents
Set the number of lines to be ignored when receiving a fax at 100% magnification and in the auto
reduction mode.
Method
1.Press the [Start] key.
2.Select the item to set.
Setting: Cut Line: A4
Set the maximum number of lines to be ignored if the received data volume exceeds the record-
ing capacity when the data is recorded in the auto reduction mode onto A4R or Letter R paper.
If the number of excess lines is below the setting, those lines are ignored. If over the setting, the
entire data on a page is further reduced so that it can be recorded on the same page.
1.By using [ Ż ] [ Ź ] or the numeric keys, change the setting value.
* :Increase the setting value if a page received in the reduction mode is reduced too much with
the trailing edge margin. Decrease the value if there is dropout in received image.
2.Press the [Start] key to set the setting value.
Setting: Cut Line: 100%
Sets the maximum number of lines to be ignored if the received data volume exceeds the record-
ing capacity when recording the data at 100% magnification.
If the number of excess lines is below the setting, those lines are ignored. If it is over the setting,
they are recorded on the next page.
1.Press the [ Ż ] [ Ź ] keys or the numeric keys to change the counter value.
* :Increase the setting value if a blank second page is output in the full magnification reception.
Decrease the value if there is dropout in received image.
2.Press the [Start] key to set the setting value.
U610 System 1
(Message: System Setting 1)
Items Contents
Cut Line: A4 Set the number of lines to be ignored when receiving a fax (A4R/Let-
terR) in the auto reduction mode.
Cut Line: 100% Set the number of lines to be ignored when receiving a fax at 100%
magnification.
Cut Line: Auto Number of lines to be ignored when receiving in the auto reduction
mode.
Contents Setting
range
Initial
setting
Data
varia-
tion
Number of lines to be ignored when receiving in the A4R
auto reduction mode. 0 to 22 0 -
Contents Setting
range
Initial
setting
Data
varia-
tion
Set the number of lines to be ignored when receiving a fax
at 100% magnification. 0 to 22 3 -