Kyocera TASKalfa 306ci, Руководство по обслуживанию, Страница: 80 / 430

2R4/2R5/2R6
6-79
Contents
Sets the fuser temperature.
Purpose
Normally no need to change. However, change the setting as corrective measures for paper curl,
creases and fusing failure on thick paper.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Center
1.Select the item to set.
2.Press the [
Ż ] [ Ź ] keys or the numeric keys to change the counter value.
3.Press the [Start] key to set the setting value.
Setting: Edge
1.Select the item to set.
2.Press the [
Ż ] [ Ź ] keys or the numeric keys to change the counter value.
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U161 Fuser temperature adjustment
(Message: Adj Fuser Temp)
Items Contents
Center Set the center thermistor temperature.
Edge Sets the edge thermistor control temperature.
Items Contents Setting range Initial
setting
Data
varia-
tion
Pressure Start Sets the temperature to start press-
ing 0 to 200 30 1°C
Drive Start Sets the drive start temperature 0 to 200 100 1°C
Ready Sets the Ready temperature 100 to 200 145 1°C
Steady Sets the secondary stability tem-
perature 100 to 200 155 1°C
Printing Set the temperature during printing 100 to 200 155 1°C
Waiting Set the standby temperature 100 to 200 155 1°C
Items Contents Setting range Initial
setting
Data
varia-
tion
Ready Sets the Ready temperature 100 to 200 105 1°C
Steady Sets the secondary stability tem-
perature 100 to 200 - 1°C
Waiting Set the standby temperature 100 to 200 - 1°C