Chapter 2 Setting Up Your pdQ Smartphone
13
Getting Started
Settin
g
Up Y
our p
d
Q
Smartp
hone
b.
Plug the serial cable from the cradle into the serial communications
(COM) port on your computer.
Your pdQ smartphone requires a dedicated port. It cannot share a port
with an internal modem or other device. If you are unsure about the
location of the serial port on your computer, refer to the user’s manual
supplied with the computer.
c.
Plug the cradle’s power cable into a power outlet.
d.
Turn on the computer.
2.
If you are not planning to synchronize data, just plug the power cable from
the cradle into a power outlet.
Installing and Charging the Battery
The battery in a new pdQ smartphone is delivered partially charged. Before
first use, you must install the battery, place the pdQ smartphone in the cradle,
and fully charge the battery.
To install the battery:
1.
Hold the pdQ smartphone so the keypad faces away from you.
2.
Put the base of the battery into the base of the battery slot.
3.
Rotate the battery gently until it snaps into place.
Note:
In addition to the main battery you just installed, the pdQ
smartphone has an internal backup battery. During shipment, this
backup battery may have become discharged. If so, the pdQ
smartphone will not power up immediately after you install the
main battery. Just put the phone in the cradle as explained in the
next section; the backup battery will recharge in five to ten minutes.
1. Line up teeth
2. Snap down
Содержание pdQ
Страница 60: ......