12
pdQ Basics Handbook
Getting Started
Getting Started
Follow the steps in this section to charge the battery and set up your pdQ
smartphone. You will need the following:
■
pdQ smartphone
■
pdQ smartphone battery
■
pdQ smartphone cradle
■
An open DB9 serial port on the computer used for HotSync™ operations
(For information about ports, refer to your computer documentation.)
Basic Setup Checklist
Use this checklist as a guide. Notice that many of these procedures are
optional, depending on how you want to use your pdQ smartphone. For
example, if you don’t plan to synchronize data with a computer, you do not
need to install the Palm Desktop software or perform a HotSync operation.
Connecting the Cradle
Your package includes a cradle for storing the pdQ smartphone, recharging its
battery, and synchronizing information with your computer. If you don’t plan
to synchronize your pdQ smartphone with a computer, use the cradle to
recharge the battery.
To connect the cradle:
1.
If you are planning to synchronize data between the pdQ smartphone and
your computer, do the following:
a.
Turn off the computer.
Required
Optional
Task
Page
x
Connect the pdQ smartphone cradle.
12
x
Install and charge the battery.
13
x
Calibrate the screen with the Digitizer.
14
x
Set your Phone Preferences.
15
x
Set the time zone.
16
x
Set the General Preferences.
17
x
Decide what e-mail application to use.
19
x
Install the Palm™ Desktop software.
20
x
Perform your first HotSync operation.
22
Содержание pdQ
Страница 60: ......