Kyocera Mita 1900N - B/W Laser Printer, Руководство по эксплуатации

Страница: 96 / 286

Operating the Storage Device
1-82
3
The default setting is
Off
. Press the
ENTER
key. A blinking question
mark (
?
) appears. Select
On
using the or key, and then press the
ENTER
key.
4
Press the > key to display
>RAM Disk Size
.
5
Press the
ENTER
key again, and change the RAM disk size using the
or key. It is not possible to make a setting that exceeds total
printer memory. The default value for the RAM disk is the total
printer memory minus 9 MB. This parameter may be set anywhere
from
0001
to
1024
depending on the available printer memory.
6
When the desired RAM disk size is displayed, press the
ENTER
key.
7
Press the
MENU
key and restart the printer. The setting will be
activated after restart.
RAM Disk Mode
? On
>RAM Disk Size
0007 Mbyte