Kyocera Mita 1900N - B/W Laser Printer, Руководство по эксплуатации

Страница: 70 / 286

e-MPS
1-56
e-MPS
To use the e-MPS system, an option Microdrive must be installed in the
printer.
e-MPS is an abbreviation for ‘enhanced-Multiple Printing System’ which
implements the following functions that are available from the printer
driver:
• Job Retention
• Job Storage
In either job mode, when printing a document, the print data is transferred
from the computer to the printer then stored on the printer’s Microdrive.
Since copies of the document are printed using the stored data, printing is
performed faster with less computer spooling time and less network traffic.
Job Retention
Job Retention has four modes as summarized below. These modes are
selected when you choose on the printer driver through the application
software:
* Jobs in excess will cause the earlier ones to be deleted.
** RAM disk does not work for e-MPS.
Option
Mode Quick Copy Proof and Hold Private Print Stored Job
Primary function To later print
additional copies To proof the first copy
before printing
multiple copies To hold the document
in printer to prevent
unauthorized access To electronically
store documents
such as fax cover
pages
Storing started Printer driver Printer driver Printer driver Printer driver
Retrieved by Operator panel Operator panel Operator panel Operator panel
Default number of
copies printed at
retrieval Same as storing One less Same as storing One
Maximum number of
jobs stored*
32, expandable to 50 32, expandable to 50 Private jobs are
deleted
automatically once it
is retrieved.
Depends on the
capacity of
Microdrive.
PIN security No No Yes Yes (Option)
Data after printing Stored Stored Stored Stored
Data at power off Deleted Deleted Deleted Stored
Microdrive
required** Yes Yes Yes Yes