54-0272-01
22
TracNet 3.0 User’s Guide
Changing the Timeout Settings
To change the timeout settings, follow the steps below.
1. At the TracNet Home page, go to the
Enabling/Disabling Timeouts box at the bottom of
the page and click the
Modify these settings
link
(see Figure 2-8 on the previous page).
2. At the Configuration page, go to “Timeout
Configurations.”
Figure 2-9
Timeout Configurations
3. Next to “Maximum Connection Time” or
“Inactivity Limit,” enter the desired number of
minutes. (For example, to set up TracNet to
disconnect from the Internet after 20 minutes of
inactivity, enter “20” in the box next to “Inactivity
Limit.”)
4. To accept your changes, click the
Update
button.
Once you’ve accepted the changes,
the new timeout settings will remain
in effect until you change them
again.