manualshive.com logo in svg

Kurzweil K2500RS, Руководство музыканта

Kurzweil K2500RS - мощный синтезатор семейства Kurzweil, обеспечивающий множество возможностей для музыкантов. Для того чтобы ознакомиться с полной функциональностью этого инструмента, вы можете бесплатно скачать Руководство пользователя на manualshive.com. Гарантировано высокое качество звука и широкие творческие возможности!

Поделиться
Скачать
background image

Song Mode

MAIN Page

12-16

              

Play

), and the location remains at the  current bar and beat, allowing you to continue from that location 

by pressing 

Play

 again.

Pressing 

Pause

 while recording will stop the recording process as if you had pressed 

Stop

.

Stop

 halts the playback or recording, and resets the Song's location to either the default "bar 1, 

beat 1" value, or to whatever location you deÞned with the Locate parameter. If the location is 
deÞned as something other than "bar 1, beat 1", press 

Stop

 twice to return to 1:1. 

Pressing 

Stop

 when the Song Status is RECORDING will always prompt the "Save this song?" 

dialog (shown on page 12-16), and provides you with the opportunity to listen to the "New" 
Song and compare it with the "Old", previously saved, Song before answering Yes or No.

Here are two useful alternatives to using these button presses:

•

Footswitches can be assigned to 

Play

/

Stop

 and 

Record

/

Stop

. On the MIDIMode : 

TRANSMIT page, assign either footswitch to controller number 102 or 103. Using 
controller 103, you can even record from within the Song editor.

•

Double button presses allow Song 

Play

, 

Pause

 and 

Stop

 soft button functions from almost 

anywhere where these buttons are not available. Use the cursor 

Left

+

Right

 double-press 

for 

Play

/

Stop

, and use the cursor 

Up

+

Down

 double-press for 

Play

/

Pause

.

Erase

 removes all channelized data from the track on which the cursor is currently positioned 

(on either the Track or Channel Þelds) or from the record enabled track if the cursor is 
positioned elsewhere. As shown on page 12-17, a dialog appears that allows you to verify your 
intentions before permanently erasing any data. The Erase function will not prompt the dialog 
or erase any data if an empty track is selected.

MISC

 accesses more sequencer control parameters found on the SongMode : MISC page. These 

miscellaneous controls include record and play mode settings, auto punch-in points, 
quantization on input settings, tempo, and click attributes, as documented later in this chapter, 
starting on page 12-18.

MIXER

 lets you view a graphic representation of panpots and level faders for each track in the 

EditSong : MIX mode. You can modify program changes, volume and pan position in this 
Mode. Record status can also be selected here. The section on the Mixer begins on page 12-23.

Save this song? Dialog

The following dialog page appears after you have recorded a track and pressed 

Stop

, or if you 

have entered the Song editor and made changes, then pressed Exit, or if you press 

Save

 in the 

Song editor.

||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Save|this|song?|||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||

|||||||

|

|||||||

|

|||||

|||||||

||||||

|

|||||

PlayOld

|

PlayNew

|

Stop|

|||||||

|Yes||

|

|No||

PlayOld 

appears along with the 

PlayNew

 soft button in the "Save this song?" dialog after the 

recording process has been stopped. Pressing 

PlayOld

 will play the current song, minus the 

last, but not yet saved, recorded data. The exception is when there is no previously recorded 
data (i.e., recording the Þrst track of a NewSong), then you will only have a 

Play

 soft button to 

audition the recorded data just entered. 

Содержание K2500RS



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для K2500RS

Macally BTWKEYMB User Manual preview
BTWKEYMB
Бренд: Macally Страницы: 14
Memorex 8188RF User Manual preview
8188RF
Бренд: Memorex Страницы: 37
Cateye MSC-CY200 Quick Start Manual preview
MSC-CY200
Бренд: Cateye Страницы: 42
Xiamen HK8065 Product Manual preview
HK8065
Бренд: Xiamen Страницы: 2
Sonics VCX134ATA Operation Manual preview
VCX134ATA
Бренд: Sonics Страницы: 19
Krüger & Matz KM0754 Owner'S Manual preview
KM0754
Бренд: Krüger & Matz Страницы: 9
Fujitsu Arrows Hello AT01 Instruction Manual preview
Arrows Hello AT01
Бренд: Fujitsu Страницы: 28
Xinmeng XM-RF87 User Manual preview
XM-RF87
Бренд: Xinmeng Страницы: 3
Franklin BOOKMAN BDS-2023 User Manual preview
BOOKMAN BDS-2023
Бренд: Franklin Страницы: 19
DS Produkte MG85-401 Instruction Manual preview
MG85-401
Бренд: DS Produkte Страницы: 44
CrimeStopper BackStopper CA-5005 Install Manual preview
BackStopper CA-5005
Бренд: CrimeStopper Страницы: 4
Franklin TDP-590 User Manual preview
TDP-590
Бренд: Franklin Страницы: 44
Symmetricom TM7000 User Manual preview
TM7000
Бренд: Symmetricom Страницы: 174
Canyon VALIANT CNS-SKB6 Manual preview
VALIANT CNS-SKB6
Бренд: Canyon Страницы: 15
Canyon CND-SKB3 Manual preview
CND-SKB3
Бренд: Canyon Страницы: 28
Canyon FOBOS GK-3 Manual preview
FOBOS GK-3
Бренд: Canyon Страницы: 30
M-Audio Axiom AIR 25 User Manual preview
Axiom AIR 25
Бренд: M-Audio Страницы: 24
Nacon CL 700 OM Manual preview
CL 700 OM
Бренд: Nacon Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды