manualshive.com logo in svg

Kurzweil K2500RS, Руководство музыканта

Поделиться
Скачать
Kurzweil K2500RS Скачать руководство пользователя страница 219

   Disk Mode

              The Multiple Object Selector Page

                                                                                                                                                                                                            

13-33

Multiple|Object|Selector||||||||||||||||

Select|:

Everything

||||||||||||||||||||||

||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||

Multiple|Object|Selector||||||||||||||||

Select|:

SearchStrg

||||||||||||||||||||||

||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||

"Select: Everything" is one way to choose all objects in the list.  The All button performs a 
similar function, as described below.  

"Select:SearchStrg" allows you to enter a string to be searched for in all of the object names in 
the list.  Any objects with names containing the string can be selected.  (Like "Dependents", this 
mode is available for all functions except Load Object.)

Multiple Object Selector Soft Buttons

Here is a functional description of the soft buttons displayed on the Multiple Object Selector 
page.  This is followed by an explanation of the parameter operation for all of the above object 
selection modes.

All

Returns the Select

 

parameter to 

Type/Range

, if it was not already set that way.  Sets 

the Type to 

All Types

 and the Bank to 

All Banks

, and also the StartId to 

0 

and the 

EndId to 

999

.  This soft button is provided as a quick way to deÞne the selection range 

as "Everything".  Once the Type and Bank parameters have been set up in this manner, 
it is easy to change either parameter to further deÞne the selection range (i.e. All Types 
of objects in the 400's bank, or Programs in All Banks)

Type

Returns the Select

 

parameter to 

Type/Range

, if it was not already set that way.  Sets 

the Bank to 

All Banks

, and also the StartId to 

0 

and the EndId to 

999

.  The Type 

parameter is set so that it 

matches the type of the currently indexed object from the 

object list.

  For instance, if you were scrolled to a Setup object when you pressed 

Multi, pressing the Type soft button would set up the Type parameter to Setup.  This 
is usually used to quickly select or deselect all objects of a particular type by scrolling 
to the Þrst object of that type, and then pressing 

Multi->Type->Set

 or 

Multi>Type-

>Clear

.  If you don't want to include all banks in the selection range, it is easy to adjust 

the Bank or ID parameters to narrow the range.

The following three soft buttons will trigger the selection and deselection of items from the 
current object listing, according to the function of the particular button.  Only objects that are 
included in the speciÞed range will be selected or deselected.  When this process is completed, 
the display returns to the object function dialog.

Toggle

For each of the objects in the speciÞed range, "toggle" the selection status of the 
object

.  In other words, if an object is already selected, then the object will be 

deselected (the asterisk will go away).  If an object is not already selected, it will be 
selected (as indicated by an asterisk in the display between the object ID and object 
name.)

Toggle is very useful for situations where you want to select all objects in the list 
except those that meet certain qualiÞcations.  For instance, in the Delete Object utility 
(from the Master

 

page, press 

 Object->Delete

), you may want to delete all objects that 

are not being used by a song that you are working on, in order to free up sample or 
object RAM in the K2vx.  You could do this by Þrst selecting the song and its 
dependents (with no other objects selected, highlight the song, press 

Multi

, then 

select "Dependents" of "Current Item" and press 

Set

) and then returning to the 

Содержание K2500RS



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды