manualshive.com logo in svg

Kurzweil K2500RS, Руководство музыканта

Kurzweil K2500RS - мощный синтезатор семейства Kurzweil, обеспечивающий множество возможностей для музыкантов. Для того чтобы ознакомиться с полной функциональностью этого инструмента, вы можете бесплатно скачать Руководство пользователя на manualshive.com. Гарантировано высокое качество звука и широкие творческие возможности!

Поделиться
Скачать
background image

 

   Setup Mode and the Setup Editor

 

              The Setup Editor

 

                                                                                                                                                                                                            

 

7-3

 

Program

 

The Program parameter selects the program for the currently displayed zone. This determines 
the program change number that will be sent on that zoneÕs MIDI channel when the setup is 
selected (if the Program Change parameter is set to On). See ÒProgram Change FormatsÓ in 
Chapter 10 for a full explanation of the K2vxÕs program change methods.

 

Channel

 

The Channel parameter deÞnes the MIDI transmit channel for the currently selected zone. It 
can be set to a value of Off, to disable the zone, or it can be set to any of the 16 MIDI channels. 
The most important thing to remember about setups is that each zone must be on a separate 
channel. This is because you can only have one program on a channel at a time. The only 
exception to this would be if you wanted the same program in more than one zone. For 
example, you could take a program and assign it to two zones, then transpose one zone up an 
octave, allowing you to play two octaves of the same sound. In general, though, you'll be using 
different programs for each zone.

 

Transpose (Xpose)

This deÞnes the amount of transposition sent by the currently selected zone. This will affect 
both the K2vx and MIDI devices receiving from the K2vx.

Low Key (LoKey), High Key (HiKey)

The LoKey and HiKey parameters deÞne the note range of the currently selected zone. The 
easiest way to change these values is to press the SetRng soft button. YouÕll be prompted to 
trigger the notes (low note Þrst) you want to be the lowest and highest notes for the zone. When 
you do, youÕll return to the Setup Editor page, and the notes you triggered will be reßected in 
the vales for LoKey and HiKey. TheyÕll also be represented by the lines beneath the program 
names in the box at the left of the Setup mode page. You can set these values with normal data 
entry methods as well.

Effect

This tells the global effects processor which effect to use for the current setup. The values 
available for this parameter are the 47 factory preset effects, and any that you program yourself. 
ItÕs not possible to use more than one preset effect per setup (the effects processor can apply 
only one preset effect at a time, even though that preset can combine up to four digital effects). 
Changing the effect for one zone will change it for all zones. It also may change the value of the 
FX Mode parameter in Effects Mode to Auto (if it isnÕt set to Auto already). This enables the 
effect to be selected automatically when a program or setup is selected, regardless of the 
operating mode at the time.

Effects Mix (FXMix)

The FXMix parameter lets you set the level of effect from 0% (no effect) to 100% (maximum). 
This also affects all three zones. Remember that the programs in the setup must have their 
audio output groups set to A (either on the OUTPUT page in the Program Editor or on the 
CHANLS page in MIDI mode), and you must use the MIX audio outputs if you want effects 
applied to the programs.

Mode

This determines whether the currently selected zone affects only the K2vx (Local), gets sent 
only via MIDI (MIDI), controls both the K2vx and connected MIDI instruments (Both), or is 
disabled (Off). If the values you set for the other control parameters on this page donÕt seem to 
be doing what you expect, check the Mode parameter to make sure the information is being 
sent where you think it is.

Содержание K2500RS



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для K2500RS

Azio KB335 User Manual preview
KB335
Бренд: Azio Страницы: 5
M-Audio OXYGEN49 User Manual preview
OXYGEN49
Бренд: M-Audio Страницы: 80
Cherry G83-6104 Technical Data preview
G83-6104
Бренд: Cherry Страницы: 2
Yamaha ELBU-F01 Assembly Instructions preview
ELBU-F01
Бренд: Yamaha Страницы: 4
Yamaha DDKU-L7 Owner'S Manual preview
DDKU-L7
Бренд: Yamaha Страницы: 1
Yamaha Electone B-605 Owner'S Manual preview
Electone B-605
Бренд: Yamaha Страницы: 13
Yamaha Disklavier Silent MPX70 Quick Start Manual preview
Disklavier Silent MPX70
Бренд: Yamaha Страницы: 13
Yamaha Electone B-4 Playing Manual preview
Electone B-4
Бренд: Yamaha Страницы: 22
Yamaha CS01 Service Manual preview
CS01
Бренд: Yamaha Страницы: 20
Yamaha Electone B-60 Manual preview
Electone B-60
Бренд: Yamaha Страницы: 31
Yamaha DX11 Operating Manual preview
DX11
Бренд: Yamaha Страницы: 36
Yamaha DX11 Operatiing Manual preview
DX11
Бренд: Yamaha Страницы: 36
Yamaha DX11 Service Manual preview
DX11
Бренд: Yamaha Страницы: 60
Yamaha DGX 205 - Portable Keyboard With MIDI Owner'S Manual preview
DGX 205 - Portable Keyboard With MIDI
Бренд: Yamaha Страницы: 94
Yamaha DJX-II Owner'S Manual preview
DJX-II
Бренд: Yamaha Страницы: 100
Yamaha DGX-500AD - 88-Note Touch-Sensitive Portable Electronic Keyboard Owner'S Manual preview
DGX-500AD - 88-Note Touch-Sensitive Portable Electronic Keyboard
Бренд: Yamaha Страницы: 112
Yamaha DJX PSR-D1 Owner'S Manual preview
DJX PSR-D1
Бренд: Yamaha Страницы: 119
Yamaha DGX 220 YPG 225 (Italian) Manuale Di Istruzioni preview
DGX 220 YPG 225
Бренд: Yamaha Страницы: 118

Бренды по названию

Популярные бренды

Загрузить еще бренды