manualshive.com logo in svg

Kurzweil K2500RS, Руководство музыканта

Kurzweil K2500RS - мощный синтезатор семейства Kurzweil, обеспечивающий множество возможностей для музыкантов. Для того чтобы ознакомиться с полной функциональностью этого инструмента, вы можете бесплатно скачать Руководство пользователя на manualshive.com. Гарантировано высокое качество звука и широкие творческие возможности!

Поделиться
Скачать
background image

 

Disk Mode

 

Disk Mode Page

 

13-2

 

              

 

that matches the SCSI ID of the device you want to address. That is, the K2vx will interact with 
the SCSI storage device whose SCSI ID matches the value of the Current Disk parameter. If you 
choose a value of Floppy, the K2vx will communicate with its ßoppy disk drive.

The manual for your SCSI disk should tell you its SCSI ID. Most newer SCSI disks show their 
SCSI IDs on their rear panels, and many have adjustable SCSI IDs.

The currently selected device will be read from or written to when you load, save, rename, or 
delete Þles. Use the soft buttons to start any of these operations. Refer to "Soft Buttons on the 
Disk Mode Page" on page 13-5 for complete information.

 

Formatting a Floppy Disk

 

Floppy disks must be formatted (initialized) to the Kurzweil format before they can be used 
with the K2vx. The K2vx uses the MS-DOS format, so ßoppies formatted on DOS computers 
should work with the K2vx. To format a disk on the K2vx, insert a ßoppy disk in the K2vxÕs 
ßoppy drive. Make sure the disk is unlocked (the sliding switch on the back of the disk is set so 
you canÕt see through the hole on that side of the disk).

Press the DISK button to enter Disk mode. Make sure the Current disk parameter says 
ÒFloppy,Ó so you donÕt accidentally format any SCSI devices you might have connected! Press 
the soft button labeled Format. The K2vx will ask you if you want to format, and a pair of Yes/
No soft buttons will appear. Press the 

 

Yes

 

 soft button, and three soft buttons will appear, letting 

you choose between formatting the ßoppy as a 720K (double-density) or 1.4M (high-density) 
disk. Press the appropriate soft button, or press the Cancel soft button.

If the ßoppy you inserted is double-density and you press the 1.4M soft button, the format 
procedure will fail. This is also true if the disk is high-density and you press the 720K soft 
button. If the ßoppy is single-sided (SSDD), you can press the 720K soft button, and the ßoppy 
will be formatted as a double-sided disk. (The only difference between single- and double-
sided ßoppies is that both sides of a double-sided ßoppy have been tested by the 
manufacturer.)

Once you select between the 720K or 1.4M format, the K2vx will remind you that formatting 
will erase the ßoppy, and will give you two more chances to cancel the formatting procedureÑ
we want to make sure you donÕt accidentally erase any disks. Press the 

 

Yes

 

 soft button to 

continue formatting. When formatting begins, the display will tell you that the disk is being 
formatted. YouÕll hear the disk drive turning, and the disk drive LED will light.

Formatting a 1.4M ßoppy disk takes just under three minutes, including the automatic 
veriÞcation. When formatting is Þnished, the display returns to the Disk mode page.

 

Connecting a SCSI Device 

 

ItÕs easy to connect SCSI devices to the K2vxÕs SCSI ports. Using a SCSI device will give you off-
line storage, and can speed up your loading and saving operations considerably.

YouÕll need a SCSI cable with a 25-pin SCSI connector on the end to be connected to the K2vx. If 
your SCSI device does not have a 25-pin connector at one end, you can Þnd SCSI cables like 
these at any personal computer store. Connect the 25-pin end of the cable to either of the K2vxÕs 
SCSI ports, and the other end to your SCSI device. Two SCSI ports are provided to enable you 
to chain SCSI devices together. Before you start connecting cables, however, please read the 
next section carefully. WeÕve also included important information about SCSI in Chapter 8 of 
the 

 

Reference Guide.

Содержание K2500RS



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для K2500RS

Zagg FOLIO Manual preview
FOLIO
Бренд: Zagg Страницы: 5
Zagg FOLIO Instruction Manual preview
FOLIO
Бренд: Zagg Страницы: 13
Technics SX-KN7000EB Service Manual preview
SX-KN7000EB
Бренд: Technics Страницы: 160
Bontempi MUSIC ACADEMY 16 6125 Owner'S Manual preview
MUSIC ACADEMY 16 6125
Бренд: Bontempi Страницы: 44
Genius LuxeMate 810 Media Cruiser Quick Manual preview
LuxeMate 810 Media Cruiser
Бренд: Genius Страницы: 5
ID Tech VERSAKEY Manual preview
VERSAKEY
Бренд: ID Tech Страницы: 16
ICON i-KEY Owner'S Manual preview
i-KEY
Бренд: ICON Страницы: 20
Novation ReMOTE LE Supplementary Manual preview
ReMOTE LE
Бренд: Novation Страницы: 7
Globlink GKM-888T User Manual preview
GKM-888T
Бренд: Globlink Страницы: 11
Cortek MK1 Quick Manual preview
MK1
Бренд: Cortek Страницы: 2
Targus AKB867 User Manual preview
AKB867
Бренд: Targus Страницы: 15
PRASTEL RADIOKEYB Instructions Manual preview
RADIOKEYB
Бренд: PRASTEL Страницы: 8
POSIFLEX PST KB136 Series User Manual preview
PST KB136 Series
Бренд: POSIFLEX Страницы: 42
POSIFLEX KB3100 User Manual preview
KB3100
Бренд: POSIFLEX Страницы: 58
ADX FIREFIGHT MK04 Instruction Manual preview
FIREFIGHT MK04
Бренд: ADX Страницы: 12
suvil KeiPad User Manual preview
KeiPad
Бренд: suvil Страницы: 8
Trust KB-1400 User Manual preview
KB-1400
Бренд: Trust Страницы: 63
Franklin Language Master LM-2000 User Manual preview
Language Master LM-2000
Бренд: Franklin Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды