Kurabo QuickGene-Auto240L, Руководство по эксплуатации

Страница: 56 / 78

3 Operation Method - Full-Auto Protocol
42
QuickGene-Auto240L Operation Manual
3
3.5 Preparation of Samples
■ Prepare a sample
・
Use full blood collected using EDTA-2NA, EDTA-2K or heparin.
・
Use full blood collected within 3 days as far as possible. The use of blood preserved for a long
period or subjected to repeated freezing and thawing procedures may result in a decrease in yield
or clogging of the cartridge.
・
If full blood is left untreated, the hematocyte layer will be isolated and may pose a problem in
system operation or isolation results. Gently mix by inverting before use and start system operation
as soon as possible.
■ Set the samples in the sample holder
(1) Gently mix contents of the blood collection tube (sample) by inverting.
(2) Remove the lids of blood collection tubes.
(3) Set the blood collection tubes on the sample holder.
Use an adapter according to the type and size of the blood collection tube.
To use the sample (blood collection tube) ID reading function, set the barcode on the blood collection
tube to the direction and position of the barcode on the sample holder.
Note
：
When several holders are used, set the blood collection tubes while paying attention to the
holder identification symbols A – C.
Adaptor
Barcode
Reading Surface
Handle
Setting Order for
Blood Collection
Tubes
セット順序
1
2
3
4
5
6
7
8