Kurabo QuickGene-Auto240L Скачать руководство пользователя страница 5

Страница: 5 / 78

iii

QuickGene-Auto240L Operation Manual

Precautions for Use

For safe use of this system, please abide by the safety descriptions below.

Symbol

Please check all contents carrying this symbol.

System

・

If the following are not abided by, fire or electric shock may result.

Use the power cable supplied with this system.

Connect to a power outlet with a grounding terminal.

Do not handle the power plug with wet hands.

Do not use with a voltage other than the indicated voltage, and avoid branch connections or

extension cords.

Do not use with a damaged power plug or loose outlet.

With a dry cloth, wipe off any dust completely from the power plug electrode and the outlet.

Do not pull on the power cable, but be sure to grip the power plug to remove from the outlet.

Remove the power plug from the outlet for safety during maintenance work.

Do not touch the power plug when thunder is heard or lightning is seen.

When a breaker is shut off, leakage is possible. Do not disassemble this system.

・

Do not spill liquid on this system. Do not place a container of liquid on this system. It may

failure, fire or electric shock.

・

If heat, smoke or a strange odor is generated by the system, remove the power plug from the

outlet.

・

Any remodeling of this system without authorization by our company is prohibited. Fire or

electric shock may result.

・

Do not place any object on this system. Do not drop any object onto or cause shock to the

system. A system failure or malfunction may occur.

・

Do not ride above this system. Falling and injury may occur.

・

If any liquid, etc. adheres to this system, promptly wipe it off with soft paper, etc. System

damage may result.

・

The sliding doors, flap doors and drawers are not fixed halfway. Releasing halfway or leaving

them open will cause injury or system failure.

・

In this system, the noise peak during operation is more than 63dB(A) and less than 70dB(A).

・

Wear protective gloves when replacing consumables.

・

If ethyl alcohol is spilled, promptly remove power plug from outlet.

・

Repair of this system must be conducted by a contractor designated by our company.

・

Use genuine parts designated by our company.

・

The repair of this system shall be conducted by a contractor designated by our company.

・

Use reagents and consumables included in our genuine parts and reagent kits.

Warning:

Caution:

Содержание QuickGene-Auto240L















































































Результаты поиска

Содержание QuickGene-Auto240L

Отзывы:

Бренды по названию

Популярные бренды

Kurabo QuickGene-Auto240L, Руководство по эксплуатации

Результаты поиска

Содержание QuickGene-Auto240L

Отзывы:

Бренды по названию

Популярные бренды